LDG AT-200Pro II Antenna Tuner 250 W

€407.00
incl. VAT, plus shipping €342.02

In stock, shipped in 1 to 2 days

View accessories
SKU
AT-200PRO2

Supply Scope

  • LDG AT-200Pro 2 antenna tuner
  • Coax power supply cable 1.8 meters
  • Manual DE, EN
The LDG AT-100Pro II and AT-200pro II are desktop tuners which cover all frequencies from 1.8 – 54 MHz, and will automatically match your antenna in no time. It features a two-position antenna switch, allowing you to switch instantly between two antennas. The AT-100Pro II requires just 1 watt to operation (5W for AT-200pro II), but will handle up to 125 watts, making it suitable for everything from QRP up to a typical 100 watt transceiver. The AT-200pro II handles up to 200W on HF, max. 100W on 6m, minimum tuning power for the AT-200pro II is 5W.


Each tuner includes over 2,000 memories for each antenna, automatically storing tuning configurations for each frequency and band as you use them. Frequency sensing circuitry lets the AT-100Pro II/AT-200pro II “know” your operating band and frequency. Whenever you transmit on or near a frequency you’ve used before, the tuner can retune from memory almost instantly: Tuning time is 0.2 sec for memory tune, 0.5 to 6 seconds for full tune.


Rugged and easy-to-read LED bargraphs show power and SWR, and a Function key on the front panel allows you to access data like mode and status.


The tuners will match dipoles, verticals, inverted-Vs or virtually any coax-fed antenna. With an optional balun, you can also use longwires or antennas fed with ladder-line. Tunes 6 to 1000 Ω loads (16 to150 on 6m), 6 to 4000 Ω with optional 4.1-balun.


Control from the front panel is simple and straightforward; just press Tune while transmitting a carrier, and the tuner will begin an automatic tuning cycle. For even more comfortable operation control cables for Icom and Yaesu transceivers is offered as an option. With the cable, a single button-press transmits a carrier, executes a tuning cycle and returns the radio to its original power and mode.


Power requirements: 11 to 16 volts DC at 500 mA max., dimensions: AT-100pro II 19 x 14 x 5 cm. AT-200pro II: 22 x 15,5 x 5cm, Weight: 0,8 Kg. A DC power cable is included.
Conn. A Conn. B Tuner Radio Function
LDG-Y-ACC 3.5 mm, Stereo 3.5 mm, Stereo Z-11Pro2, Z-100+, AT-100pro2,
AT-200pro2, AT-600pro2, AT-1000pro2
FT-100, FT-857, FT-897, FT-891, FT-991/A Tune
LDG-Y-ACC2 10pin MiniDIN 3.5 mm, Stereo Z-11Pro2, Z-100+, AT-100pro2,
AT-200pro2, AT-600pro2, AT-1000pro2
FT-450/D, FT-710, FT-950, FT-DX10, FT-DX1200 Tune
LDG-Y-ACC3 15pin SubD 3.5 mm, Stereo Z-11Pro2, Z-100+, AT-100pro2,
AT-200pro2, AT-600pro2, AT-1000pro2
FT-DX101D/MP, FT-DX3000 Tune
LDG-Y-CAT 8-pin MiniDIN 8-pin MiniDIN Z-817, AT-897+, YT-100 FT-100, FT-857, FT-897 Tune + Power
LDG-I-ACC Icom Tuner 3.5mm + DC Z11-Pro2, Z-100Plus, AT-100Pro2,
AT-200Pro2, AT-600Pro2, AT-1000Pro2
all Icom w/ Tuner conn. Tune + Power
LDG-I7-ACC Icom Tuner 6-pin MiniDIN IT-100 all Icom w/ Tuner conn. Tune + Power
Technical Data
Product Name AT-200PRO II
Impedance Range (Ω) 6 - 800 Ohm
Min. Tune Power (W) 5
Switching Time (ms) 0,2
Supported Bands 160m, 80m, 40m, 30m, 20m, 17m, 15m, 12m, 10m, 6m
Current Intake (A) max. 0.75 A
Supply Voltage [V] 11 - 16 V
Display 2x LED Bargraph (Power, SWR)
Number of Memories 2x 2000
Tuner type Automatic Tuning
Brand LDG
Weight 900 g
Max. Power [W] 250 W
Frequency Range 1.8 - 54 MHz
Size W x H x D 180 x 51 x 241 mm

Related categories