antenna tuner mAT-10 unsymm. 30W, for FT-817/818

Operation is via a button on the tuner. By the direct coupling between tuner and transceiver the so-called "One Touch Tune" becomes possible - the tuner switches the operating mode to CW and reduces the power, tunes and then automatically switches back to the previously set operating mode and transmission power. This makes the tuning process very comfortable. As with all mAT tuners, a tuning once found is stored in one of 16000 memories, depending on the frequency. If returning to the same frequency later, the data is read from the memory, the tuning process takes place in approx. 0.2 seconds. Due to the use of bi-stable latch relays, which keep their state without power, the power consumption is extremely low. The tuner can be switched to a bypass mode if the antenna does not require tuning on a certain band. The connectors are two BNC sockets.