LDG AT-1000Pro II Antenna Tuner 1000 W

€729.00
incl. VAT, plus shipping €612.61

In stock, shipped in 1 to 2 days

View accessories
SKU
AT-1000PRO2

Fully automatic antenna matching with power up to 1000W! Controlled by a microprocessor the SWR is analyzed, a switched L network tuned faster than any manual control could do. Usually matches a SWR of 10:1 dowen to 1.5:1 within 3 seconds. Once found settings are stored in memory, resulting in even faster tuning when the same frequency is later tuned again. The easy t oread LED bar graphs show power and SWR. Tuning is done with low power, not while the PA is engaged!


To offer the same ease of use as with the other LDG tuners, the AT-1000pro II has the following improvements over it's predecessor:


  • Two selectable antennas

  • 2000 memories for each antenna

  • Dedicated keys for manual fine tuning


Technical Data AT-1000pro II

  • 1000 Watt max. power
  • Switched L Network
  • Bargraph for SWR
  • Tuning time 0.1 to 4 seconds, 3 seconds average, 0.2 sec near known frequencies
  • Power requirements: 11 to 15VDC, max. 1A
  • Two unsymmetric antenna connectors (PL), for symmetric antennas please use a 1:4 balun
  • Frequency range 1.8 to 54 MHz, Impedance from 6 to 1000 Ω (6 to 150 Ω on 6m)
  • Power ranges: 20 to 1000 W SSB, 750 W CW, 500 W Digital, 100 W on 6m
  • Suitable for dipoles, verticals, inverted V etc.
  • Dimensions: 25.4 x 28 x 7.6cm, Weight ca. 3 kg
Conn. A Conn. B Tuner Radio Function
LDG-Y-ACC 3.5 mm, Stereo 3.5 mm, Stereo Z-11Pro2, Z-100+, AT-100pro2,
AT-200pro2, AT-600pro2, AT-1000pro2
FT-100, FT-857, FT-897, FT-891, FT-991/A Tune
LDG-Y-ACC2 10pin MiniDIN 3.5 mm, Stereo Z-11Pro2, Z-100+, AT-100pro2,
AT-200pro2, AT-600pro2, AT-1000pro2
FT-450/D, FT-710, FT-950, FT-DX10, FT-DX1200 Tune
LDG-Y-ACC3 15pin SubD 3.5 mm, Stereo Z-11Pro2, Z-100+, AT-100pro2,
AT-200pro2, AT-600pro2, AT-1000pro2
FT-DX101D/MP, FT-DX3000 Tune
LDG-Y-CAT 8-pin MiniDIN 8-pin MiniDIN Z-817, AT-897+, YT-100 FT-100, FT-857, FT-897 Tune + Power
LDG-I-ACC Icom Tuner 3.5mm + DC Z11-Pro2, Z-100Plus, AT-100Pro2,
AT-200Pro2, AT-600Pro2, AT-1000Pro2
all Icom w/ Tuner conn. Tune + Power
LDG-I7-ACC Icom Tuner 6-pin MiniDIN IT-100 all Icom w/ Tuner conn. Tune + Power
Technical Data
Product Name AT-1000PROII
Impedance Range (Ω) 6 - 1000 Ohm
Min. Tune Power (W) 5
Current Intake (A) max. 1 A
Supply Voltage [V] 11 - 15 V
Display 2x LED Bargraph (Power, SWR)
Number of Memories 2000
Tuner type Automatic Tuning
Color Black
Brand LDG
Weight 2.2 kg
Max. Power [W] 1000 W
Frequency Range 1.8 - 54 MHz
Documentation Languages EN
Size W x H x D 254 x 76 279 mm

Related categories