Flexa Yagi

Flexa FX-213 Yagi 144 MHz, 10.2 dBD

Flexa FX-213 Yagi 144 MHz, 10.2 dBD

Flexa Yagi
without VAT, plus shipping
In stock, shipped in 3 to 4 days.
Boom and lower strut of these antennas are made from a special, lightweight aluminium alloy. The elements are mounted with special clamps made from stainless steel. Elements are also made from stainless steel, for 23cm from aluminium. The mast clamp is made from hot dip galvanized steel.

The element lengths and distances follow the DL6WU design. With the use of folded dipoles and Teflon cable baluns a low SWR is achieved over a wide frequency range. The dipole case uses an N connector. Max. power load 800W FM on 2m, 400W FM on other bands.

Common data
Impedance: 50 Ω, N-Connector, Side lobes: <-15dB, continous power load 400 W FM (800 W on 2m), Balun: Teflon cable, Elements: 2 mm Ø, Boom: 15 x 15 x 1 mm, Mast: ≤ 63 mm Ø
Technical Data
Mono-/Multiband Monoband
Boom length [cm] 276 cm
Supported Bands 2m


We are happy to advise you!

Whether you have questions about our products, the ordering process or our services, whether you are a complete professional or a beginner - it doesn't matter!  Our experts are there to help you in word and deed - independent of the frequency range and radio application.

Don't hesitate - contact us.